国际无损检测标准目录_标准

ISO/TC135 Non-destructive testing，无损检测

ISO 2400:1972

Welds in steel -- Reference block for the calibration of equipment for ultrasonic examination

钢焊缝超声检测设备校准用参考试块

ISO 3057:1998

Non-destructive testing -- Metallographic replica techniques of surface examination

无损检测表面检测的金相复型技术

ISO 3058:1998

Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers

无损检测目视检测辅助设备低倍放大镜的选择

ISO 3059:2001

Non-destructive testing -- Penetrant testing and magnetic particle testing - Viewing conditions

无损检测渗透检测和磁粉检测观察条件

ISO 3452-1:2008

Non-destructive testing -- Penetrant testing -- Part 1: General principles

无损检测渗透检测第 1 部分：总则

ISO 3452-2:2006

Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials

无损检测渗透检测第 2 部分：渗透材料的检验

ISO 3452-3:1998

Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks

无损检测渗透检测第 3 部分：参考试块

ISO 3452-4:1998

Non-destructive testing -- Penetrant testing -- Part 4: Equipment

无损检测渗透检测第 4 部分：设备

ISO 3452-5:2008

Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C

无损检测渗透检测第 5 部分：50 ºC 以上的高温渗透检测

ISO 3452-6:2008

Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 degrees C

无损检测渗透检测第 6 部分：10 ºC 以下的低温渗透检测

ISO 3530:1979

Vacuum technology -- Mass-spectrometer-type leak-detector calibration

真空技术质谱检漏仪校准

ISO 5576:1997

Non-destructive testing -- Industrial X-ray and gamma-ray radiology -- Vocabulary

无损检测工业 X 射线和伽玛射线照相词汇

ISO 5577:2000

Non-destructive testing -- Ultrasonic inspection -- Vocabulary

无损检测超声检测词汇

ISO 5579:1998

Non-destructive testing -- Radiographic examination of metallic materials by X- and gamma rays -- Basic rules

无损检测金属材料 X 和伽玛射线照相检测基本规则

ISO 5580:1985

Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements

无损检测工业射线照相观片灯最低要求

ISO 7963:2006

Non-destructive testing -- Ultrasonic testing --- Specification for calibration block No. 2

无损检测超声检测 2号校准试块技术条件

ISO 9712:2005

Non-destructive testing -- Qualification and certification of personnel

无损检测人员资格鉴定与认证

ISO 9934-1:2001

Non-destructive testing -- Magnetic particle testing -- Part 1: General principles

无损检测磁粉检测第 1 部分：总则

ISO 9934-2:2002

Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media

无损检测磁粉检测第 2 部分：检测介质

ISO 9934-3:2002

Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment

无损检测磁粉检测第 3 部分：设备

ISO 10375:1997

Non-destructive testing -- Ultrasonic inspection -- Characterization of search unit and sound field

无损检测超声检测探头及其声场的表征

ISO 11537:1998

Non-destructive testing -- Thermal neutron radiographic testing -- General principles and basic rules

无损检测热中子辐射照相检测总则和基本规则

ISO 11699-1:2008

Non-destructive testing -- Industrial radiographic film -- Part 1: Classification of film systems for industrial radiography

无损检测工业射线照相胶片第 1 部分：工业射线照相胶片系统的分类

ISO 11699-2:1998

Non-destructive testing -- Industrial radiographic films -- Part 2: Control of film processing by means of reference values

无损检测工业射线照相胶片第 2 部分：用参考值方法控制胶片处理

ISO 12706:2000

Non-destructive testing -- Terminology - Terms used in penetrant testing

无损检测术语渗透检测

ISO 12710:2002

Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments

无损检测超声检测超声检测仪电特性的评定

ISO 12713:1998

Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers

无损检测声发射检测换能器的一级校准

ISO 12714:1999

Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors

无损检测声发射检测声发射传感器的二级校准

ISO 12715:1999

Ultrasonic non-destructive testing -- Reference blocks and test procedures for the characterization of contact search unit beam profiles

超声无损检测表征接触式探头声束截面性能的参考试块和测试规程

ISO 12716:2001

Non-destructive testing -- Acoustic emission inspection -- Vocabulary

无损检测声发射检测词汇

ISO 12718:2008

Non-destructive testing -- Eddy current testing -- Vocabulary

无损检测涡流检测词汇

ISO 12721:2000

Non-destructive testing -- Thermal neutron radiographic testing -- Determination of beam L/D ratio

无损检测热中子辐射照相检测中子束 L/D 的测定

ISO 14096-1:2005

Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

无损检测射线照相胶片数字系统的质量鉴定第 1 部分：定义、像质参数的定量测量、标准参考胶片和定量控制

ISO 14096-2:2005

Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 2: Minimum requirements

无损检测射线照相胶片数字系统的质量鉴定第 2 部分：最低要求

ISO 15548-1:2008

Non-destructive testing -- Equipment for eddy current examination -- Part 1: Instrument characteristics and verification

无损检测涡流检测设备第1部分：仪器特性与验证

ISO 15548-2:2008

Non-destructive testing -- Equipment for eddy current examination -- Part 2: Probe characteristics and verification

无损检测涡流检测设备第2部分：探头特性与验证

ISO 15548-3:2008

Non-destructive testing -- Equipment for eddy current examination -- Part 3: System characteristics and verification

无损检测涡流检测设备第3部分：系统特性与验证

ISO 15549:2008

Non-destructive testing -- Eddy current testing -- General principles

无损检测涡流检测总则

ISO 15708-1:2002

Non-destructive testing -- Radiation methods -- Computed tomography -- Part 1: Principles

无损检测辐射方法计算机层析成像第 1 部分：原则

ISO 15708-2:2002

Non-destructive testing -- Radiation methods -- Computed tomography -- Part 2: Examination practices

无损检测辐射方法计算机层析成像第 2 部分：检测方法

ISO/TS 18173:2005

Non-destructive testing -- General terms and definitions

无损检测通用术语和定义

ISO 18175:2004

Non-destructive testing -- Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments

无损检测不用电子测量仪器评定超声脉冲回波检测系统工作特性

ISO 19232-1:2004

Non-destructive testing -- Image quality of radiographs -- Part 1: Image quality indicators (wire type) -- Determination of image quality value

无损检测射线照相底片像质第1部分：线型像质计像质指数的测定

ISO 19232-2:2004

Non-destructive testing -- Image quality of radiographs -- Part 2: Image quality indicators (step/hole type) -- Determination of image quality value

无损检测射线照相底片像质第2部分：阶梯孔型像质计像质指数的测定

ISO 19232-3:2004

Non-destructive testing -- Image quality of radiographs -- Part 3: Image quality classes for ferrous metals

无损检测射线照相底片像质第3部分：黑色金属像质分类

ISO 19232-4:2004

Non-destructive testing -- Image quality of radiographs -- Part 4: Experimental evaluation of image quality values and image quality tables

无损检测射线照相底片像质第4部分：像质指数和像质表的实验评价

ISO 19232-5:2004

Non-destructive testing -- Image quality of radiographs -- Part 5: Image quality indicators (duplex wire type) -- Determination of image unsharpness value

无损检测射线照相底片像质第5部分：双线型像质计图像不清晰度的测定

ISO 20807:2004

Non-destructive testing -- Qualification of personnel for limited application of non-destructive testing

无损检测有限应用范围的无损检测人员资格鉴定

ISO/TS 21432:2005

Non-destructive testing -- Standard test method for determining residual stresses by neutron diffraction

无损检测测定残余应力的中子衍射方法

ISO/TS 22809:2007

Non-destructive testing -- Discontinuities in specimens for use in qualification examinations

无损检测资格考试用试样中的不连续超声波探伤仪http://www.chaoshengbotanshangyi.org

ISO/TR 25107:2006

Non-destructive testing -- Guidelines for NDT training syllabuses