法国主要无损检测标准题录(超声检测)_标准

法国:
NF A04-305-1983	钢铁厚度不小于6mm钢板超声反射法检测质量定义测试方法 IRON AND STEEL. ULTRASONIC REFLECTION TESTING OF SHEET WITH THICKNESS NOT LESS THAN 6 MM. DEFINITION OF QUALITY. TEST METHODS.
NF A04-306-2002	钢铁带平行法兰和IPE梁的H梁的超声检测 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams.
NF A04-307-2002	无损检测钢棒的超声检测 Non destructive testing - Ultrasonic testing of steel bars.
NF A04-311-64	钢件超声检测用标准试块
NF A04-312-2002	无损检测厚度等于或大于6mm的奥氏体和奥氏体铁素体不锈钢板制品的超声检测(反射法) Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method).
NF A04-315-3-1998	钢锻件的无损检测第3部分:铁素体或马氏体钢锻件的超声检测 Non-destructive testing of steel forgings. Part 3 : ultrasonic testing of ferritic or martensitic steel forgings.
NF A04-315-4-1999	钢锻件的无损检测第4部分:奥氏体和奥氏体铁素体不锈钢锻件的超声检测 Non-destructive testing of steel forgings. Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings.
NF A09-020-4-2000	无损检测术语第4部分:超声检测 Non destructive testing - Terminology - Part 4 : terms used in ultrasonic testing.
NF A09-300-87	无损检测超声检验名词术语
NF A09-310-87	无损检测超声检验用A型及B型校准试块
NF A09-311-2000	无损检测超声检验 1号校验试块规范 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1.
NF A09-315-87	A型和B型校准试块的使用方法
NF A09-320-84	金属制品手动超声检测用超声探伤仪特性的校准方法
NF A09-320-1-2000	无损检测超声检验设备的特性和验证第1部分:仪器 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1 : instruments.
NF A09-320-2-2001	无损检测超声检验设备的特性和验证第2部分:探头 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
NF A09-320-3-2000	无损检测超声检验设备的特性和验证第3部分:组合设备 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3 : combined equipment.
NF A09-321-1988	无损检测超声检测超声仪器的选用方法 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
NF A09-322-85	工业用超声探头规格
NF A09-323-87	工业用超声探头特性表示方法
NF A09-325-87	超声检验中声波束的一般规则
NF A09-326-87	接触式探头超声波束特性的现场测定方法
NF A09-330-86	聚焦超声波束特性的定义及其校准方法
NF A09-331-86	使用聚焦超声波束测定缺陷大小的方法
NF A09-340-2-2001	无损检测超声检验第2部分:灵敏度和范围设定 Non-destructive testing - Ultrasonic examination - Part 2 : sensitivity and range setting.
NF A09-340-4-2002	无损检测超声检验第4部分:垂直于表面的不连续性的检验 Non-destructive testing - Ultrasonic examination - Part 4 : examination for discontinuities perpendicular to the surface.
NF A09-340-5-2001	无损检测超声检验第5部分:不连续性的特性和尺寸 Non-destructive testing - Ultrasonic examination - Part 5 : characterization and sizing of discontinuities.
NF A09-350-84	无损检测声发射词汇 NON DESTRUCTIVE TESTING. VOCABULARY USED IN ACOUSTIC EMISSION.
NF A09-351-1984	无损检测声发射源定位的推荐方法 NON DESTRUCTIVE TESTING. RECOMMANDED PRACTICES FOR THE LOCALIZING OF ACOUSTIC EMISSION SOURCES.
NF A09-352-85	声发射检验的推荐方法
NF A09-353-85	声发射波单通道特性的测量
NF A09-353-1-2001	无损检测声发射设备特性第1部分:设备描述 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1 : equipment description.
NF A09-353-2-2001	无损检测声发射设备特性第2部分:操作特性验证 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2 : verification of operating characteristic.
NF A09-354-85	商品化声发射压电传感器及其技术数据的意义
NF A09-355-1985	无损检测声发射压电传感器的耦合 NON DESTRUCTIVE TESTING. ACOUSTIC EMISSION. COUPLING OF PIEZOELECTRIC SENSORS.
NF A09-360-1985	无损检测声发射光纤复合材料零件与构件的检验 NON DESTRUCTIVE TESTING. ACOUSTIC EMISSION. EXAMINATION OF COMPOSITE MATERIAL PARTS AND STRUCTURES. MATRIX FIBERS.
NF A09-390-2002	无损检测声发射一般原理 Non-destructive testing - Acoustic emission - General principles.
NF A49-200-77	钢管,锅炉及压力容器用无缝钢管超声检测方法分类及应用
NF A49-870-81	钢管,锅炉及压力容器用无缝钢管纵向缺陷的超声检测方法
NF A49-875-6-2000	钢管无损检测第6部分:探测无缝钢管横向不完整性的自动全圆周超声检测 Non-destructive testing of steel tubes - Part 6 : Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections.
NF A49-875-7-1996	钢管无损检测第7部分:探测无缝钢管和焊接(埋弧焊除外)钢管纵向不完整性的自动全圆周超声检测 Non destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.
NF A49-875-8-2000	钢管无损检测第8部分:探测电焊钢管焊缝纵向不完整性的自动超声检测 Non-destructive testing of steel tubes - Part 8 : automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections.
NF A49-875-9-2000	钢管无损检测第9部分:探测埋弧焊钢管焊缝纵、横向不完整性的自动超声检测 Non-destructive testing of steel tubes - Part 9 : automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections.
NF A49-875-13-2000	钢管无损检测第13部分:无缝和焊接(埋弧焊除外)钢管的自动全圆周超声测厚 Non-destructive testing of steel tubes - Part 13 : automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged ar welded) steel tubes.
NF A49-875-14-2000	钢管无损检测第14部分:探测无缝和焊接(除埋弧焊外)钢管层状不完整性的自动超声检测 Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imperfections.
NF A49-875-15-2000	钢管无损检测第15部分:探测焊接钢管用带/板材层状不完整性的自动超声检测 Non-destructive testing of steel tubes - Part 15 : automatic ultrasonic testing of strip/plate used in the manufacure of welded steel tubes for the detection of laminar imperfections.
NF A49-875-16-2000	钢管无损检测第16部分:探测用焊接钢管焊缝邻近区域层状不完整性的自动超声检测 Non-destructive testing of steel tubes - Part 16 : automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections.
NF A49-875-17-2000	钢管无损检测第17部分:探测无缝和焊接钢管管端层状不完整性的超声检测 Non-destructive testing of steel tubes - Part 17 : ultrasonic testing of tubes ends of seamless and welded steel tubes for the detection of laminar imperfections.
NF A89-520-1997	焊缝无损检验焊接接头的超声检验 Non destructive examination of welds. Ultrasonic examination of welded joints.
NF A89-521-1997	焊缝无损检验焊接接头的超声检验验收等级 Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.
NF A89-522-1998	焊缝无损检验超声检验焊缝的迹象特征 Non-destructive examination of welds. Ultrasonic examination. Characterization of indications in welds.
NF A89-611-1992	钢焊缝焊缝超声检验用2号校验试块 Welds in steel. Calibration block number 2 for ultrasonic examination of welds.
NF C01-801-1999	电工词汇第801章:声学和电声学 Electrotechnical Vocabulary. Chapter 801 : acoustics and electroacoustics.
NF S30-101-1973	声学术语一般定义 ACOUSTICS. TERMINOLOGY. GENERAL DEFINITIONS.
NF S30-102-1973	声学术语声与振动的传输系统和换能器 ACOUSTICS. TERMINOLOGY. TRANSMISSION SYSTEMS AND TRANSDUCERS FOR SOUND AND VIBRATIONS.
NF S30-103-1973	声学术语仪器 ACOUSTICS. TERMINOLOGY. INSTRUMENTS.
NF S30-104-1974	声学术语记录和重现 ACOUSTICS. TERMINOLOGY. RECORDING AND REPRODUCTION.
NF S31-029-1973	声学声冲击物理性能的注释和测量 ACOUSTICS. DESCRIPTION AND MEASUREMENT OF PHYSICAL PROPERTIES OF SONIC BANGS.
NF S31-065-1981	声学建筑声学测试管中声吸收系数与声阻抗的测定 ACOUSTICS. TESTING OF ARCHITECTURAL ACOUSTICS. DETERMINATION OF SOUND ABSORPTION COEFFICIENT AND IMPEDANCE IN A TUBE.

无损检测 http://www.wusunjiance.net
无损123http://www.wusun123.com
网站目录http://www.wangzhanmulu.cn
分类目录http://www.fenleimulu.net

无损检测网 > 标准

法国主要无损检测标准题录(超声检测)

频道精选

热门标签

热门新闻

最火资讯