首页 资讯 法规 行业 标准 展会 探伤 硬度 仪器 声发射 磁粉 粗糙 视频

德国主要无损检测标准题录(超声检测)

来源: 作者:中国无损检测 人气: 发布时间:2024-11-21
摘要:德国 : DIN 1332-1969 声学 符号 Acoustics; symbols DIN 2274-1981 检验用V型试块 设计,要求 Inspection vee blocks; designs, requirements DIN 25435-1-1987 轻水反应堆初级回路元件的在役检验 遥控超声检验 Inservice inspections for primary circuit
德国:
DIN 1332-1969 声学 符号 Acoustics; symbols
DIN 2274-1981 检验用V型试块 设计,要求 Inspection vee blocks; designs, requirements
DIN 25435-1-1987 轻水反应堆初级回路元件的在役检验 遥控超声检验
Inservice inspections for primary circuit components of light water reactors; remote-controlled ultrasonic inspection
DIN 25435T1-79 核技术设备的在役超声检测
DIN 25450-1990 工检测用超声设备 Ultrasonic equipment for manual testing
DIN 51934-1990 炭素材料检测 成形产品的声速测定 固体材料
Testing of carbon materials; determination of velocity of sound of shaped articles; solid materials
DIN 54110 超声检测概念
DIN 54119-81 超声检测术语定义
DIN 54120-73 调整和检查脉冲回波式探伤仪用Ⅰ型参考试块及其应用
DIN 54122-73 调整和检查脉冲回波式探伤仪用Ⅱ型参考试块及其应用
DIN 54123-80 无损检测 检测焊接、轧制和爆炸成型包复层的超声波
Non-destructive Test; Ultrasonic Method of Testing Claddings, Produced by Welding, Rolling and Explosion
DIN 54124T1-83 脉冲回波式超声探伤仪的现场校正
DIN 54125-82 焊缝超声检测 (INDT,85-2)
DIN 54126T1-82 超声检测的一般规则:对检测系统和检测对象的要求
DIN 54126T2-82 超声检测的一般规则:检测方法
DIN 65455-1990 宇航 钢、镍、钛合金无缝管 超声检验
Aerospace; seamless tubes in steel, nickel and titanium alloys; ultrasonic inspection
DIN EN 583-1-1998 无损检测 超声检验 第1部分:一般原理
Non-destructive testing - Ultrasonic examination - Part 1: General principles; German version EN 583-1:1998
DIN EN 583-2-2001 无损检测 超声检验 第2部分:灵敏度和范围设置
Non-destructuve testing - Ultrasonic examination - Part 2: Sensitivity and range setting; German version EN 583-2:2001
DIN EN 583-3-1997  无损检验.超声检测 第3部分:传输法
Non-destructive testing - Ultrasonic testing - Part 3: Transmission technique; German version EN 583-3:1997
DIN EN 583-4-2002 无损检测 超声检验 第4部分:垂直于表面的不连续性的检验
Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface; German version EN 583-4:2002
DIN EN 583-5-2001 无损检测 超声检验 第5部分:不连续性的特性和尺寸
Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities; German version EN 583-5:2000
DIN V ENV 583-6-2000 无损检测 超声检验 第6部分:不连续性探测和定量的时间渡越衍射法
Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities; German version ENV 583-6:2000
DIN EN 1330-9-2000 无损检测术语 第9部分:声发射检测
Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing; Trilingual version EN 1330-9:2000
DIN EN 1712-2002 焊缝的无损检测 焊接接头的超声检测 验收等级
Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels; German version EN 1712:1997 + A1:2002
DIN EN 1713-2002 焊缝的无损检测 超声检测 焊缝的迹象特征
Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds; German version EN 1713:1998 + A1:2002
DIN EN 1714-2002 焊缝的无损检测 焊接接头的超声检测
Non-destructive testing of welds - Ultrasonic testing of welded joints; German version EN 1714:1997 + A1:2002
DIN EN 10228-3-1998 钢锻件的无损检测 第3部分:铁素体或马氏体钢锻件的超声检测
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings; German version EN 10228-3:1998
DIN EN 10228-4-1999 锻件的无损检测 第4部分:奥氏和奥氏体铁素体不锈钢锻件的超声检测
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings; German version EN 10228-4:1999
DIN EN 10246-6-2000 钢管的无损检测 第6部分:探测无缝钢管横向不完整性的自动全圆周超声检测
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; German version EN 10246-6:1999
DIN EN 10246-7-1996 钢管的无损检测 第7部分:探测无缝和焊接钢管(埋弧焊除外)纵向不完整性的自动全圆周超声检测 Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal imperfections; German version EN 10246-7:1996
DIN EN 10246-8-2000 钢管的无损检测 第8部分:探测电焊钢管焊缝纵向不完整性的自动超声检测
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections; German version EN 10246-8:1999
DIN EN 10246-9-2000 钢管的无损检测 第9部分:探测埋弧焊钢管焊缝纵、横向不完整性的自动超声检测 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc-welded steel tubes for the detection of longitudinal and/or transverse imperfections; German version EN 10246-9:2000
DIN EN 10246-14-2000 钢管的无损检测 第14部分:探测无缝和焊接钢管(埋弧焊除外)层状不完整性的自动超声检测Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections; German version EN 10246-14:1999
DIN EN 10246-16-2000 钢管的无损检测 第16部分:探测焊接钢管焊缝邻近区域层状不完整性的自动超声检测 Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections; German version EN 10246-16:2000
DIN EN 10246-17-2000 钢管的无损检测 第17部分:探测无缝和焊接钢管管端层状不完整性的超声检测
Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections; German version EN 10246-17:2000
DIN EN 10306-2002 钢铁 带平行法兰和IPE梁的H梁的超声检测
Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams; German version EN 10306:2001
DIN EN 10307-2002 无损检测 厚度等于或大于6mm的奥氏体和奥氏体铁素体不锈钢板制品的超声检测(反射法) Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method); German version EN 10307:2001
DIN EN 10308-2002 无损检测 钢棒的超声检测
Non-destructive testing - Ultrasonic testing of steel bars; German version EN 10308:2001
DIN EN 12223-2000 无损检测 超声检验 1号校验试块的规范
Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1; German version EN 12223:1999
DIN EN 12668-1-2000 无损检测 超声检验设备的特性和验证 第1部分:仪器
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments; German version EN 12668-1:2000
DIN EN 12668-2-2001 无损检测 超声检验设备的特性和验证 第2部分:探头
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes; German version EN 12668-2:2001
DIN EN 12668-3-2000 无损检测 超声检验设备的特性和验证 第3部分:组合设备
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment; German version EN 12668-3:2000
DIN EN 13477-1-2001 无损检测 声发射检测 设备特性 第1部分:设备描述
Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 1: Equipment description; German version EN 13477-1:2001
DIN EN 13477-2-2001 无损检测 声发射检测 设备特性 第2部分:操作特性验证
Non-destructive testing - Acoustic emission testing; Equipment characterisation - Part 2: Verification of operating characteristics; German version EN 13477-2:2001
DIN EN 13554-2002 无损检测 声发射 一般原理
Non-destructive testing - Acoustic emission - General principles; German version EN 13554:2002
DIN EN 27963-1992 钢材焊接 焊缝超声检验用2号校验试块
Welds in steel; calibration block No. 2 for ultrasonic examination of welds (ISO 7963:1985); german version EN 27963:1992
DIN EN 61828-2002 超声学 聚焦换能器 传输场的定义和测量方法
Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields (IEC 61828:2001); German version EN 61828:2001
DIN ISO 4386-1-1992 滑动轴承 多层金属滑动轴承 粘接处超声波无损检测
Plain bearings; metallic multilayer plain bearings; non-destructive ultrasonic testing of bond; identical with ISO 4386-1:1992
SEL 072-77 厚钢板超声检验技术性交货条件(西德钢铁交货技术条件SEL)
SEL 1915-77 耐热钢管材纵向缺陷的超声检验
SEL 1922-77 铁素体钢铸件的超声检测
qnix8500测厚仪http://www.Qnix8500.com                                 
进口测厚仪http://www.jinkoucehouyi.com
狄夫斯高http://www.defelsko17.com                                           
无损检测http://www.wusunjiance.cn
责任编辑:中国无损检测 转载请注明出处 www.wusunjiance.net
首页 | 关于我们 | 联系我们 | 发展历程 | 网站声明 | 合作洽谈 | 常见问题 | 广告报价 | 服务协议

Copyright © 2010-2017 无损检测网 版权所有 备案号:冀ICP备10013405号-141