|
美国: |
|
ASTM A609/A609M-91 |
碳钢、低合金钢和马氏体不锈钢铸件的超声波检测(A-1) |
|
ASTM A388/A388M-1995 |
大型钢锻件的超声检验(A-1) (80版在INDT,83-4)
Ultrasonic Examination of Heavy Steel Forgings |
|
ASTM A418-1996 |
汽轮机和发电机转子钢锻件的超声检测方法(A-1) |
|
ASTM A435/A435M-2017 |
钢板的直射法超声检测(A-1) Straight-Beam Ultrasonic Examination of Steel Plates
（适用于厚度在12.5mm以上的碳和合金轧制钢板直声束脉冲反射法超声波检测） |
|
ASTM A503/A503M-2001 |
大型曲轴锻件的超声检验规范
Specification for Ultrasonic Examination of Large Forged Crankshafts |
|
ASTM A531/A531M-1991(1996) |
涡轮发电机钢定位环的超声检验(旧版在INDT,82-4)
Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
|
ASTM A577/A577M-1990(1996) |
钢板斜射法超声检验(A-1)Ultrasonic Angle-Beam Examination of Steel Plates |
|
ASTM A578/A578M-2017 |
特殊用途的普通钢板与复合钢板直射法超声检验(A-1)（适用于厚度在10mm以上的特殊用途碳和合金轧制钢板直声束脉冲反射法超声波检测）Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications |
|
ANSI/ASTM A745/A745M-1994 |
奥氏体钢锻件的超声检验(A-1) (INDT,83-1为77年版)
Ultrasonic Examination of Austenitic Steel Forgings |
|
ASTM A898/A898M-1991(1996) |
轧制钢结构型材超声直射法超声检验(A-1)
Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes |
|
ASTM A939-1996 |
圆柱形锻件孔表面超声检验的试验方法
Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings |
|
ASTM B509-77 |
核用镍合金板材补充要求的规范 |
|
ASTM B510-77 |
核用镍合金棒材补充要求的规范 |
|
ASTM B513-77 |
核用镍合金无缝管材补充要求的规范 |
|
ASTM B548-1990(1997) |
压力容器用铝合金板的超声检验(B-7)
Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
|
ASTM B594-1997 |
宇航用铝合金锻制品的超声检验(B-7)
Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications |
|
ASTM B773-1996 |
超声C-扫描评价钎焊或焊接的电接触组件连接质量
Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies |
|
ASTM B811-90 |
锆合金核燃料包复管超声探伤(B-10) |
|
ASTM C597-1997 |
混凝土中脉冲速度的测试方法(C-9) Test Method for Pulse Velocity Through Concrete |
|
ASTM C623-1992 |
利用谐振法测定玻璃和玻璃陶瓷的杨氏模量、剪切模量及泊松比的试验方法
Test Method for Young's Modulus, Shear Modulus and Poisson's Ratio for Glass and Glass-Ceramics by Resonance |
|
ASTM C885-1987 |
利用声谐振法测定耐火型材杨氏模量的试验方法
Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance |
|
ASTM C1198-2001 |
声谐振法测定高级陶瓷动态扬氏模量、剪切模量和泊松比的标准试验方法
Standard Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio for Advanced Ceramics by Sonic Resonance |
|
ASTM C1259-1998 |
用脉冲激励振动法检测高级陶瓷动态扬氏模量、剪切模量和泊松比 |
|
ASTM C1331-2001 |
用宽带脉冲反射交互作用法测量高级陶瓷中超声速度的标准试验方法
Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
|
ASTM C1332-2001 |
脉冲反射接触法测量高级陶瓷超声衰减系数的标准试验方法
Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
|
ASTM C1383-1998 |
用冲击回波法测量混凝土板的P波速度和厚度的标准试验方法
Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method |
|
ASTM C1419-1999 |
室温下耐火材料中的声速及其在获得近似杨氏模量中应用的标准试验方法
Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus |
|
ASTM D2845-1995 |
岩石的脉冲速度和超声弹性常数的实验室测定方法(D-18)
Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock |
|
ASTM D2966 |
发动机冷却器中铝的气蚀腐蚀特性的超声能量测试法 |
|
ASTM D3426-1997 |
用脉冲波测定实心电绝缘材料的电介质击穿电压和绝缘强度的试验方法(10.02)
Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves (10.02) |
|
ASTM D4883-1999 |
用超声波技术测定聚乙烯密度的试验方法
Test Method for Density of Polyethylene by the Ultrasound Technique (08.03) |
|
ASTM D5300-1993 |
结合机械和超声方法测量聚合物基热固塑料预浸料坯含脂率和其它相关性能的试验方法
Test Method for Measurement of Resin Content and Other Related Properties of Polymer Matrix Thermoset Prepreg by Combined Mechanical and Ultrasonic Methods |
|
ASTM D6011-2001 |
测定声学测速计/温度计性能的试验方法
Test Method for Determining the Performance of a Sonic Anemometer/Therometer |
|
ASTM D6132-1997 |
使用超声波无损测量混凝土上有机涂层膜厚度的标准试验方法
Standard Test Method for Nondestructive Measurement of Dry film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic |
|
ASTM E113-81 |
共振法超声检测 |
|
ASTM E114-2015 |
接触法超声脉冲回波直射标准方法
Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
|
ASTM E127-2015 |
铝合金超声波标准参考试块制造和校验的标准方法
Standard Practice for Fabrication and Control Aluminum Alloy Ultrasonic Standard Reference Blocks |
|
ASTM E164-2013 |
焊缝接触法超声检测的标准方法 （适用于手动脉冲A扫描反射法对黑色及铝合金焊缝的检测）
Standard Practice for Contact Ultrasonic Testing of Weldments |
|
ASTM E166 |
焊接件超声波接触法检验 |
|
ASTM E213-2014e1 |
金属管材超声检测的标准方法 （适用于金属管材脉冲反射法超声波检测）
Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |
|
ASTM E214-2001 |
使用纵波脉冲反射法液浸超声检验规程
Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed Longitudinal Waves |
|
ASTM E273-2015 |
焊接管焊缝超声检测的标准方法 （适用于管径为50mm以上，壁厚为3~27mm的金属管材焊缝的超声检测）
Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
|
ASTM E317-2016 |
不使用电子测量仪器评定超声脉冲反射检测仪器与系统性能特性的标准方法
Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments |
|
ASTM E428-2008(2013) |
超声检验用钢、铝参考试块制造和控制的标准方法
Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing |
|
ASTM E494-2015 |
测量材料中超声速度的标准方法
Standard Practice for Measuring Ultrasonic Velocity in Materials |
|
ASTM E500-86B |
超声检测术语定义 |
|
ASTM E569/E569M-2013 |
受控激励时构件声发射监测的标准方法
Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
|
ASTM E587-2015 |
超声斜射接触法检测的标准方法（适用于接触式脉冲斜射法超声检测）
Standard Practice for Ultrasonic Angle-Beam Contact Testing |
|
ASTM E588-95 |
用超声波法探测轴承钢大块夹杂物
Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
|
ASTM E610-82 |
声发射术语定义 |
|
ASTM E650/E650M-2017 |
压电式声发射传感器安装的标准指南
Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
|
ASTM E664/E664M-2015 |
用液浸法测量超声纵波视在衰减的标准方法
Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic waves by Immersion Method |
|
ASTM E749/E749M-2017 |
连续焊接过程中声发射监测的标准方法
Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
|
ASTM E750-2015 |
表征声发射仪器的标准方法
Standard Practice for Characterizing Acoustic Emission Instrumentation |
|
ASTM E751/E751M-2017 |
电阻点焊声发射监测的标准方法
Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
|
ASTM E797/E797M-2015 |
手动超声脉冲反射接触法测厚的标准方法
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
|
ASTM E804-88 |
用平底孔尺寸之间的外推法校正超声检验系统的实施方法 |
|
ASTM E914-85 |
绝缘高空操作台的声发射检测方法 |
|
ASTM E976-2015 |
声发射传感器响应再现性测定的标准方法
Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response |
|
ASTM E1001-2016 |
液浸超声纵波脉冲反射法探测和评定不连续性的标准方法
Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
|
ASTM E1002-2011 |
超声检漏的标准方法
Standard Practice for Leaks Using Ultrasonics |
|
ASTM E1065/E1065M-2014 |
超声探头特性评定标准指南
Standard Guide for Evaluating Characteristics of Ultrasonic Search Units |
|
ASTM E1067/E1067M-2011 |
玻璃纤维增强塑料树脂(FRP)槽罐容器声发射检验的标准方法
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin(FRP) Tanks/Vessels |
|
ASTM E1106-2012 |
声发射传感器一级校准的标准方法
Standard Test Method for Primary Calibration of Acoustic Emission Sensors |
|
ASTM E1118/E1118M-2016 |
增强型热固树脂管(RTRP) 声发射检验的标准方法
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (Rtrp) |
|
ASTM E1139/E1139M-2017 |
声发射连续监视金属压力极限的标准方法
Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
|
ASTM E1158-2014 |
金属和合金材料超声脉冲纵波检测用参考试块材料选择和制作的标准指南
Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material |
|
ASTM E1211/E1211M-2017 |
表面配置声发射传感器探测泄漏及定位的标准方法
Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
|
ASTM E1289-1997 |
声传输损耗的参照试样规范 Specification for Reference Specimen for Sound Transmission Loss |
|
ASTM E1315-1993(2002) |
凸圆柱曲面钢材的超声检验
Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces |
|
ASTM E1324-2016 |
超声检测仪器某些电子特性测定的标准指南
Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments |
|
ASTM E1454-2002(2008) |
用于数字超声检测数据计算机化传输数据区的标准方法
Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data |
|
ASTM E1419/E1419M-2015a |
利用声发射检验无缝充气压力容器的标准方法
Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission |
|
ASTM E1495/E1495M-2017 |
复合材料, 层板以及粘接件声-超声评定的标准指南
Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
|
ASTM E1544-1999 |
阶梯试块的制作及用于固体声速测量系统评估所产生误差的实施方法 |
|
ASTM E1685-1995 |
超声脉冲回波法测量紧固件长度变化的标准规程
Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique |
|
ASTM E1736-2015 |
纤维缠绕压力容器声-超声评定的标准方法
Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
|
ASTM E1774-2017 |
电磁声换能器(EMATs)的标准指南
Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
|
ASTM E1781/E1781M-2013 |
声发射传感器二级校准的标准方法
Standard Practice for Secondary Calibration of Acoustic Emission Sensors |
|
ASTM E1816-2012 |
应用电磁声传感器(EMAT)技术的超声检测标准方法
Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
|
ASTM E1888/E1888M-2017 |
用软木芯玻璃纤维增强塑料制成的压力容器声发射检验的标准方法
Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
|
ASTM E1901-2013 |
接触法超声脉冲反射波直射法探测和评估不连续性的标准指南
Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
|
ASTM E1930/E1930M-2017 |
应用声发射检查常压和低压充液金属储罐的标准方法
Standard Practice for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission |
|
ASTM E1932-2012 |
小零件声发射检验的标准指南
Standard Guide for Acoustic Emission Examination of Small Parts |
|
ASTM E1961-2016 |
用聚焦探头分区识别环形焊缝的机械化超声检测的标准方法
Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
|
ASTM E1962-2014 |
应用电磁声换能器(EMAT)技术的超声表面检测标准方法
Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
|
ASTM E2001-2013 |
应用谐振超声波频谱法探测金属和非金属零件缺陷的标准指南
Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts |
|
ASTM E2075/E2075M-2015 |
应用聚丙烯棒检定声发射传感器响应稳定性的标准方法
Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
|
ASTM E2076/E2076M-2015 |
应用声发射检验玻璃纤维增强塑料风扇叶片的标准方法
Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
|
ASTM E2191/E2191M-2016 |
卷绕覆合层充气压力容器声发射检验的标准方法
Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
|
ASTM E2192-2013 |
应用超声检测平面缺陷高度尺寸的标准指南
Standard Guide for Planar Flaw Height Sizing by Ultrasonic |
|
ASTM E2223-2013 |
无缝、充气的钢压力容器超声斜射检验标准方法
Standard Practice for Examination of Seamless,Gas-Filled,Steel Pressure Vessels Using Angle Beam Ultrasonic |
|
ASTM E2373/E2373M-2014 |
应用超声时间衍射技术（TOFD）的标准方法
Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
|
ASTM E2374-2016 |
声发射系统性能验证的标准指南
Standard Guide for Acoustic Emission System Performance Verification |
|
ASTM E2375-2016 |
粗糙制品超声检测的标准方法
Standard Practice for Ultrasonic Testing of Wrought Products |
|
ASTM E2478-2011(2016) |
利用声发射确定玻璃增强塑料（GFRP）材料损伤容限设计的标准方法
Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic(GFRP) Materials Using Acoustic Emission |
|
ASTM E2479-2016 |
利用迟到纵波测量聚乙烯槽壁超声速度的标准方法
Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal(LCR) Waves |
|
ASTM E2491-2013 |
评定相控阵超声检测仪器与系统的标准指南
Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems |
|
ASTM E2534-2015 |
金属和非金属零件谐振检测时通过正弦输入扫查过程补偿的标准方法
Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts |
|
ASTM E2580-2012 |
航空用平板与夹芯复合材料超声检测的标准方法
Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
|
ASTM E2598/E2598M-2013 |
声发射检验蒸汽加热铸铁衬基的纸干燥器的标准方法
Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
|
ASTM E2661/E2661M-2015 |
航空用板类与平板复合材料构件声发射检验的标准方法
Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications |
|
ASTM E2663-2014 |
无损评价超声检测数字图像与通信的标准方法
Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods |
|
ASTM E2700-2014 |
接触法超声相控阵检测焊缝的标准方法
Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
|
ASTM E2775-2016 |
应用压电效应传输导波检测地面上钢管道的标准方法
Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction |
|
ASTM E2863-2012 |
钢制热压球形压力容器焊缝声发射检验的标准方法
Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization |
|
ASTM E2904-2017 |
表征与验证相控阵探头的标准方法 Standard Practice for Characterization and Verification of Phased Array Probes |
|
ASTM E2906/E2906M-2013 |
利用声脉冲反射计检验管束的标准方法 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles |
|
ASTM E2907/E2907M-2013 |
利用来自裂纹声发射检验造纸机轧辊的标准方法 Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
|
ASTM E2929-2013 |
利用磁致伸缩换能器的导波检测地面上钢管的标准方法 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction |
|
ASTM E2983-2014 |
应用声发射监控结构健康的标准指南 Standard Guide for Application of Acoustic Emission for Structural Health Monitoring |
|
ASTM E2984/E2984M-2014 |
利用可控静水压对高压、低碳锻造管进行声发射检验的标准方法
Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
|
ASTM E2985/E2985M-2014 |
依据超声频谱测量弹性常数确定金属纯度的标准方法 Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy |
|
ASTM E3044/E3044M-2016e1 |
聚乙烯对接熔焊接头超声检测的标准方法 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints |
|
ASTM E3045-2016 |
利用声振动热像探测裂纹的标准方法 Standard Practice for Crack Detection Using Vibroacoustic Thermography |
|
ASTM E3100-2017 |
混凝土结构声发射检验标准指南 Standard Guide for Acoustic Emission Examination of Concrete Structures |
|
ASTM F600-83 |
热塑管道套筒对接接头的超声无损评价 |
|
ASTM F914-1998 |
航空人员隔热装置的声发射试验方法
Test Method for Acoustic Emission for Insulated Aerial Personnel Devices |
|
ASTM F1512-1994 |
超声C-扫描评定溅射靶背衬板组件接合的标准规程
Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies |
|
ANSI/IEEE 260.4-1996 |
声学量值的字母符号和缩写 Letter Symbols and Abbreviations for Quantities Used in Acoustics |
|
ANSI/IEEE 1057-2002 |
数字化波形记录仪标准 Standard for Digitizing Waveform Recorders |
|
ANSI S1.1-1994 |
声学术语 Acoustical terminology |
|
ASME 2235:2000 |
超声衍射时差（TOFD）法 |
|
ASME 2235-4:2001 |
锅炉压力容器规范案例 用超声检验取代射线照相[S] |
|
ASME Boiler & Pressure Vessel Code(ASME锅炉压力容器规范)第V卷《无损检测》2004版，第4篇“焊缝超声检测方法”，强制性附录-包含相控阵、TOFD等计算机辅助声成像技术；第5篇“材料超声检测” |
|
MIL-STD-1263-73 |
超声检测人员的资格鉴定与证书颁发(已停用) |
|
MIL-I-46175-76 |
SAE D 7003球墨铸铁的超声检测 |
|
MIL-STD-770-87 |
铅的超声检验 |
|
MIL-HDBK-726-74 |
超声检测手册(已由MIL-HDBK-728/6代替) |
|
MIL-STD-2154-82 |
锻制金属的超声检验 |
|
MIL-HDBK-728/6(92) |
超声检验 |
|
MIL-HDBK-732A(91) |
复合材料无损检验方法-声发射法 |
|
MIL-HDBK-786(93) |
用模拟声发射事件确保现场声发射系统的运作 |
|
MIL-HDBK-787(93) |
复合材料的无损检验方法-超声波法 |
|
MIL-HDBK-788(89) |
声发射传感器的选择 |
|
MIL-STD-1875(83) |
超声波检验要求 |
|
MIL-STD-1945(91) |
声发射试验术语和定义汇编 |
|
MIL-U-85067A(84) |
MARK71 MODO 弹头外壳焊缝超声评定 |
|
API RP 2X-2004 |
海上结构建造的超声检验和超声技术人员考核指南 |
手机版
深圳市无损检测人员培训中心ChSNDT3级培训考试顺利结束...
