法国相关标准: |
NF A04-150-1984 |
铝及镁合金铸件的射线照相检验 Radiographic examination of aluminium and magnesium alloy castings. |
NF A04-304 |
射线照相透度计标准 |
NF A09-020-3-1997 |
无损检测术语 第3部分:工业射线照相检测
Non-destructive testing. Terminology. Part 3 : terms used in industrial radiographic testing. |
NF A09-200-1985 |
无损检测:工业放射学词汇 |
NF A09-201-1994 |
无损检测 金属材料X和γ射线照相检验的一般原理
Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma rays. |
NF A09-205-1984 |
工业射线检验阶梯型和孔型象质计 |
NF A09-205-1-1994 |
无损检测 射线照相的图像质量 第1部分:像质计(丝型),图像质量值的测定
Non-destructive testing. Image quality of radiogaphs. Part 1 : image quality indicators (wire type), determination of image quality value. |
NF A09-205-2-1994 |
无损检测 射线照相的图像质量 第2部分:像质计(阶梯型和孔型),图像质量值的测定 Non-destructive testing. Image quality of radiographs. Part 2 : image quality indicators (step/hole type). Determination of image quality value. |
NF A09-205-3-1996 |
无损检测 射线照相的成像质量 第3部分:黑色金属的成像质量等级
Non-destructive testing. Image quality of radiographs. Part 3 : image quality classes for ferrous metals. |
NF A09-205-4-1994 |
无损检测 射线照相的成象质量 第4部分:成象质量值和成象质量表的实验评定
NON DESTRUCTIVE TESTING. IMAGE QUALITY OF RADIOGRAPHS. PART 4 : EXPERIMENTAL EVALUATION OF IMAGE QUALITY VALUES AND IMAGE QUALITY TABLES. (EUROPEAN STANDARD EN 462-4). |
NF A09-205-5-1996 |
无损检测 射线照相的成象质量 第5部分:像质计(双丝型),图像不清晰度值的测定 NON-DESTRUCTIVE TESTING. IMAGE QUALITY OF RADIOGRAPHS. PART 5 : IMAGE QUALITY INDICATORS (DUPLEX WIRE TYPE), DETERMINATION OF IMAGE UNSHARPNESS VALUE. (EUROPEAN STANDARD EN 462-5). |
NF A09-206-1985 |
无损检测 工业放射学 根据像质计获得χ射线图象表达视觉信息总量特性的常规方法
NON DESTRUCTIVE TESTING. INDUSTRIAL RADIOLOGY. CONVENTIONAL METHOD FOR THE CHARACTERISATION OF THE AMOUNT OF VISUAL INFORMATION CONVEYED BY X-RAY IMAGES FROM IMAGE QUALITY INDICATORS. |
NF A09-210-1992 |
无损检测 工业射线照相底片观片灯 最低要求
Non-destructive testing. Industrial radiographic illuminators. Minimum requirements. |
NF A09-211-1984 |
能量300KeV~1.5MeV铱192照相胶片显象主体系统的感光速度与平均对比度求法 |
NF A09-212-1984 |
工业放射学 能量50~300KeV射线照相胶片系统的感光速度与平均梯度测定
Industrial radiography. Determination of the speed and average gradient of film-based image receiving systems for use in the energy range from 50 keV to 300 keV. |
NF A09-214-1985 |
无损检测 工业放射学 能量30~150KeV的荧光增感屏和射线照相胶片组成图像接收系统的灵敏度与平均对比度测定
NON-DESTRUCTIVE TESTING. INDUSTRIAL RADIOLOGY. DETERMINATION OF THE SENSITIVITY AND AVERAGE CONTRAST OF IMAGE RECEIVER SYSTEMS CONSISTING OF A FLUORESCENT INTENSIFIER SCREEN AND RADIOGRAPHIC PAPER,USED IN THE ENERGY RANGE FROM 30 KEV TO 150 KEV. |
NF A09-215-1985 |
工业射线检验使用或不使用金属增感屏时照相底片的识别图表 |
NF A09-216-1985 |
无损检测 工业放射学 能量50KeV~1.5MeV射线照相胶片和1~2块金属荧光增感屏为主体的显象系统感光度与平均对比度测定 |
NF A09-217-1-1994 |
无损检测 工业射线照相胶片 第1部分:工业射线照相胶片体系的分类
Non destructive testing. Industrial radiographic film. Part 1 : classification of film systems for industrial radiography. |
NF A09-217-2-1997 |
无损检测 工业射线照相胶片 第2部分:借助参考值对胶片处理的控制
Non-destructive testing. Industrial radiographic film. Part 2 : control of film processing by means of reference values. |
NF A09-220-1986 |
工业中子射线检验非放射性部件管理方面试验设备特性的求法 |
NF A09-222-1985 |
无损检测 工业放射学 与荧光增感屏一起使用的射线照相胶片的识别卡
NON-DESTRUCTIVE TESTING. INDUSTRIAL RADIOLOGY. IDENTIFICATION CARD FOR RADIOGRAPHIC PAPERS USED WITH FLUORESCENT INTENSIFIER SCREENS. |
NF A09-223-1985 |
无损检测 工业放射学 使用金属荧光增感屏的射线照相胶片的识别卡
NON-DESTRUCTIVE TESTING. INDUSTRIAL RADIOLOGY. IDENTIFICATION CARD FOR RADIOGRAPHIC FILM USED WITH FLUOROMETALLIC FLUORESCENT INTENSIFIER SCREENS. |
NF A09-250-3-2002 |
无损检测 射线检测 第3部分:金属材料X和γ射线检测的一般原理
Non-destructive testing - Radioscopic testing - Part 3 : general principles of radioscopic testing of metallic materials by X- and gamma rays. |
NF A49-875-10-2000 |
钢管的无损检测 第10部分:探测自动熔弧焊钢管焊缝不完整性的射线照相检测 Non-destructive testing of steel tubes - Part 10 : radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections. |
NF A89-510-1997 |
焊缝的无损检验 焊接接头的射线照相检验
Non-destructive examination of welds. Radiographic examination of welded joints. |
NF A89-511-1998 |
焊缝的无损检验 焊接接头的射线照相检验 验收等级
Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels. |
NF A89-550-1985 |
壁厚50mm以下钢管环焊缝射线检验的推荐方法 |
NF A89-565-1987 |
焊接和相关工艺 电阻点焊和缝焊射线照相检测的推荐实施规范
Welding and allied processes. Radiographic testing of resistance spot and seam welded joints. Recommended practice. |
NF A91-116-1976 |
χ射线光谱法测定金属镀层厚度 |
NF A91-206-2001 |
金属和非金属涂层 厚度测量 β背散射法
Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method. |
NF C15-164-1976 |
χ射线发生和应用设备工业射线检验设备的特殊注意事项 |
NF C74-100-1972 |
χ射线仪的制造和试验要求(包括医学、工业、检测、科研用途) |
NF C74-111-1985 |
射线探伤设备χ射线探伤机的构造和使用注意事项 |
NF C74-206-1993 |
核放射成象装置的特性和试验条件 安格型γ射线机
Characteristics and test conditions of radionuclide imaging devices. Anger type gamma cameras. |
NF M60-302-1996 |
核废料 用γ光谱法进行无损测量 表征和检验封装废料中放射性核活性的γ光谱法无损测量 WASTE. NON DESTRUCTIVE MEASUREMENTS BY GAMMA SPECTROMETRY. GAMMA SPECTROMETRY NON DESTRUCTIVE MEASUREMENTS OF THE ACTIVITY OF RADIONUCLIDES IN PACKAGED WASTE FOR CHARACTERIZATION AND INSPECTION PURPOSES. |
NF M60-305-1999 |
核能 核燃料技术废物 利用核辐射转化的无损测量对核辐射的评估
NUCLEAR ENERGY. NUCLEAR FUEL TECHNOLOGY-WASTE. ASSESSMENT OF RADIONUCLIDES BY NON DESTRUCTIVE MEASUREMENT OF RADIONUCLIDE TRAVERS. |
NF M60-511-1998 |
个人照相剂量仪 Personal photographic dosemeters. |
NF M60-515-1984 |
核能 参照β辐射校验剂量计和剂量率计以及测定其对β辐射能量的响应
NUCLEAR ENERGY. REFERENCE BETA RADIATIONS FOR CALIBRATING DOSEMETERS AND DOSERATEMETERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF BETA RADIATION ENERGY. |
NF M60-516-2-2000 |
参照中子辐射 第2部分:与辐射区域基本数量特性相关的辐射防护装置的校验基础
Reference neutron radiations - Part 2 : calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field. |
NF M60-520-1989 |
X和γ参考辐射剂量计 能量范围8keV至1.3MeV之间的辐射防护
DOSIMETRY OF X AND GAMMA REFERENCE RADIATIONS FOR RADIATION PROTECTION OVER THE ENERGY RANGE FROM 8 KEV TO 1,3 MEV. |
NF M60-522-1998 |
X和伽玛辐射 直接或非直接读数容量型袖珍剂量仪
X and gamma radiation. Indirect- or direct-reading capacitor-type pocket dosemeters. |
NF M60-551-1983 |
辐射防护 用于γ射线机的装置 RADIATION PROTECTION. APPARATUS FOR GAMMA RADIOGRAPHY |
NF M60-552-1987 |
辐射防护 固定安装的放射性核素计
Radiation protection. Radionuclides gauges. Gauges designed for permanent installation. |
NF M61-001-1967 |
工业射线照相用密封式γ射线源 |
NF M61-002-1984 |
核能 密封射线源 概述和分类
Nuclear energy. Sealed radioactive sources. General and classification. |
NF M61-003-1972 |
密封式放射源的密封性试验方法 |
NF M61-004-1984 |
非密封放射物质 标识和鉴证 Unsealed radioactive substances. Identification and certificate. |
NF M61-100-2000 |
核能 辐射防护 手足和眼睛用个人热致发光剂量计
Nuclear energy - Radiation protection - Individual thermoluminescence dosemeters for extremities and eyes. |
NF M62-102-1992 |
辐射防护 无损检测用工业γ射线照相的安装
Radiation protection. Installations for industrial gamma radiography for non destructive testings. |
NF M62-104-1998 |
核能 辐射防护 混凝土屏蔽墙的伽吗射线屏蔽窗
NUCLEAR ENERGY. PROTECTION AGAINST RADIATIONS. SHIELDING WINDOWS AGAINST GAMMA RADIATIONS FOR CONCRETE SHIELDED WALLS. |
NF M62-106-2002 |
中子辐射防护屏蔽 选择适用材料的设计原理和考虑
Neutron radiation protection shielding - Design principles and considerations for the choice of appropriate materials. |
NF M62-231-1993 |
屏蔽室 高放射性安装 指南 SHIELDED ENCLOSURES. HIGH ACTIVITY INSTALLATIONS. GUIDELINES. |
NF M62-302-2000 |
辐射防护 X和γ辐射的个人剂量计处理器的定期评价的标准和性能限定
Radiation protection - Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation. |
NF S21-007-1963 |
感光材料、工业用射线照相底片的尺寸规格 |
NF S75-505-1994 |
电离辐射和放射性污染的防护手套
PROTECTIVE GLOVES AGAINST IONIZING RADIATION AND RADIOACTIVE CONTAMINATION. (EUROPEAN STANDARD EN 421). |
NF S77-100-1972 |
对有害辐射的眼睛防护 PROTECTION OF THE EYE AGAINST HARMFUL RADIATION. |